50 CFM Deliquescent Air Dryer, 3/4" Connections, 250 PSIG Max Pressure, Dry-O-Li

Description

50 CFM Deliquescent Air Dryer, 3/4" Connections, 250 PSIG Max Pressure, Dry-O-Li
50 CFM Deliquescent Air Dryer, 3/4" Connections, 250 PSIG Max Pressure, Dry-O-Li
The D8 from Van Air Systems is a deliquescent compressed air dryer for 50 CFM.  It's designed for any air system using a 10 - 15 horsepower air compressor.  The dryer has no moving parts or power requirement, which makes it perfect for tough operating environments, intermittent flow air systems, point of use applications, mobile equipment, and areas with electrical restrictions.  The D8 is similarly ideal for outdoor applications.
How the D8 works.
The D8 dryer is an epoxy lined tank filled with Dry-O-Lite desiccant tablets.  These tablets act like sponges for humidity and soak up water vapor.  Wet compressed air enters the bottom of the D8 and flows up through the Dry-O-Lite, which gradually dissolves.  The dissolved Dry-O-Lite and water collect at the bottom of the tank to be drained.  Dry compressed air exits the top of the tank.  An F200-55 or equivalent after-filter should be installed to remove oil mist and particulates.  Clean dry air is now ready for use.
Installation.
Bolt to a wall or structural support.  Add Dry-O-Lite.  Connect air lines.
Maintenance.
Drain liquid after each 8 hours of operation.  A manual ball valve is included.   Pro tip: use flexible tubing to collect the liquid in a container.  Consider installing a
MDV-400 automatic drain with a 1/2" valve
.  Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary. Dry-O-Lite is non-toxic and non-hazardous.
Specifications & Features
Rated flow capacity: 50 CFM @ 100 PSIG.
Up to 20⁰ F dew point suppression
250 PSI Maximum Working Pressure
ASME Code stamped carbon steel vessel, with enamel exterior coating and internal epoxy lining
3/4" NPT(f) air inlet and outlet connections
1/2" ball valve
Mounting bracket included
Site glass for desiccant level monitoring
Dimensions: 40" (h) x 8" (diameter), 60 lbs. empty
Includes one resealable 50 lbs. pail of Dry-O-Lite desiccant.  The D8 holds 35 lbs. Dry-O-Lite desiccant.
10 year warranty.  5 years 100% guarantee against defects in materials and workmanship.  Next five years are pro-rated.
What's Included
(1) Model D8 Dryer
(1) 50 Lbs. Pail Dry-O-Lite Desiccant
Manual Drain Valve
Mounting Bracket
Recommended Accessories
Auto Drain MDV400-I 1/2"
Filter F200-55-1/2-B-MD-PD6
Technical Documents
Dryer Dimensional Drawing
Operation and Instruction Manual
** PLEASE READ
DELIVERY
SECTION BELOW REGARDING AVAILABILITY **
ITEMS DESCRIBED AS "OEM EQUIVALENT" ARE AFTERMARKET REPLACEMENTS
CONTACT SELLER WITH QUESTIONS
ABOUT US
At Moisture Boss, LLC our specialty is clean dry compressed air. We offer a huge range of products for the removal of oil, particulates and water from industrial compressed air systems. Our product range includes compressed air dryers, filters, desiccants, condensate drains, oil-water separators and thousands of OEM Equivalent filter elements. With more than two decades of industry experience, we look forward to putting our knowledge to work for you.
DELIVERY
Most of our listings drop ship in 1-2 business days directly from the manufacturer or 3rd party warehouses; this is how we keep prices and costs low. Available quantities shown on eBay are a good faith representation of current stock
but are not synchronized in real time with warehouse inventory
. If an item is back ordered after order placement, we will contact you immediately.
For time critical requirements, please contact us for a delivery commitment.
We are also glad to offer expedited shipping options and international shipping.
WARRANTY
Capital equipment carries the warranty of the manufacturer, typically 12 months or longer. Contact us for details on a given item.
OEM Equivalent filtration products (coalescing elements, air-oil separators, oil filters, and inlet filters) and guaranteed to fit the housing of the original equipment manufacturer.  OEM Equivalent filters may be returned pre-paid within 30 days of shipment; a 20% re-stock fee may apply.  Returned filters must be in un-used and re-salable condition.  Return authorization requests are required. Mist eliminators and manufactured-to-order filter elements may not be returned.
RETURNS
Most capital equipment may be returned in new and un-used condition within 30 days of the purchase. The buyer will be responsible for pre-paid return freight and may be charged a 20% re-stocking fee. A return authorization number is required. Manufactured-to-order equipment may not be returned.
Return requests for desiccant will be managed at our discretion.
DEFINITION
Products marked "OEM Equivalent" are aftermarket replacement products.  We have no affiliation with the original manufacturers whose part numbers are used for reference within listings described as "OEM Equivalent."